19" 1u Rack Mount Gigabit Network Switch with 12 SFP Ports+12 RJ45 Ports

• Customization: Available
• Type: Fiber Transceiver
• Wiring Devices: MDF
• Model NO.: 1G 12F+12RJ45 Optical Switch
• Certification: CE, ISO, RoHS, GS
• Condition: New
• Transmission Rate: 10/100/1000m
• Fiber Port: 12 SFP
• Ethernet Port: 12 RJ45
• Transmission Distance: 500-160km
• Mode: Singlemode, Multimode
• Fiber Wavelength: 850nm/1310nm/1490nm/1550nm
• Material: Metal
• Color: Black,Also Suport Customize
• Transport Package: Carton
• Specification: 1u 19′ ′
• Trademark: Default is Neutral, LOGO is also supported
• Origin: China
• HS Code: 8517629900
• Production Capacity: 50000 PCS/Month

Product Description

19" 1U rack mount gigabit network switch with 12 sfp ports+12 rj45 ports

Brief Introduction

This 24 port switch:Multi-optical convergence gigabit series is based on our own software developed by an optical core aggregation switches, which have 12 Gigabit ports and 12 10/100 / 1000M adaptive Ethernet port. SFP optical interface can only be 1000M full duplex mode; RJ45 electrical interface can work in 10M, 100M, 1000M full duplex or half duplex mode, is a true 10/100 / 1000M adaptive fiber switch, optical module has a singlemode/ multimode, single fiber / dual fiber, dual fiber use two core optical fiber to transmit all the way Ethernet signal, and single fiber only one core fiber can transmit all the way Ethernet signal, transmission distance: Multimode: 550m; Singlemode: 20/40/80 / 120KM (optional).

Multi-Optical Aggregation The core Gigabit optical converged switch consists of RJ45 electrical interface twisted pair interfaces and SFP optical interfaces for connecting twisted pair and optical fibers respectively. It is characterized by electrical port can be straight line / cross line adaptive, can be full duplex, but also half-duplex mode. The SFP interface can be inserted into SFP optical modules and electrical modules according to user requirements. It has good stability and reliability.




Features

 

> 12 1000Base-X optical ports and 12 1000Base-T electrical ports;
> standard: Comply with IEEE802.3z / A;
> Ethernet electrical port supports full-duplex and half-duplex network communications, with auto-negotiation capabilities;
> Ethernet port supports AUTO-MDIX (cross line and straight line adaptation);
> High backplane bandwidth of 128GB, Layer 2 switching packet forwarding rate to achieve full speed; can detect when the optical signal is lost when the opposite device is powered off or fiber fails, and through the indicator light indicates the alarm;
> The optical switch electrical port is a 10/100/1000 M adaptive port, which sets its own rate according to the highest rate of the electrical port of the connected peer.
> No relay transmission distance up to 2 ∽ 120 km;
> Optical interface optional: single / double fiber, single mode / multimode;
> nterface: SC / FC / ST / LC    LC (SFP) (default);
> Power: Built-in power  AC220V;

Technical Spec
 

Ethernet Ports:	> Electrical port: Number of interfaces: 12;  Interface type: RJ45, 10/100 / 1000M, > Rate: 10/100 / 1000M adaptive, full / half duplex fully adaptive > Protocol: Supports IEEE 802.3, IEEE 802.1Q (VLAN) > MAC Address Table: You can learn 4096 MAC addresses > Physical interface: RJ45 seat, support Auto-MDIX (cross / straight line adaptive)
Optical Ports	Optical port: Number of interfaces: 12;  Interface type: SFP, 1000M > Wavelength: single mode 1310nm / 1550nm Multimode 850nm / 1310nm (optional) > Fiber cores: Single / dul fiber (optional) > Transmit power: -9dBm∽-5dBm > Transmission length: single mode 20/40/60/80/100 / 120km Multimode 2km (optional) > Receiving sensitivity: better than-36dBm > Connector: SC / FC / LC, default: SFP
Mechanical properties	> Housing: IP30 degree of protection, metal housing  >Installation: Desktop, wall-mounted
Industry Standard	> EMI: FCC Part 15. CISPR (EN55022) class A > EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-6 (Common Mode Conduction) > Industry: IEC6100-6-2 > Railway: EN50155.EN50121-4 > Transportation: NEMA TS-2 > Coal: GB / T3836.1 / 2/3/4 > Machinery: IEC68-2-6 / 27/32
working environment	>Working temperature: 0 ~ 50 ºC > Storage temperature: -20 ~ 70 ºC > Relative humidity: 5 ~ 90% (no condensation)
power supply	AC 110-240V,built in power

Certifications




Workshop





Contact