48 core dome type fiber optic splice closure
1. Scope of application
TKS-M011 Fiber Optic joint box provide with 5 fiber cable in-out round ports and the cable diameter is from Ф8-Ф21. It is made of PP and with the mechanical sealing structure filled with the sealing material.
2. Basic structure and configuration
2.1 Dimension and capacity
| Outside dimension (Height x Diameter) |
480mm×220mm |
| Weight (excluding outside box) |
3500g-4100 g |
| Number of inlet/out ports |
5pieces |
| Diameter of fiber cable |
Φ8mm~Φ21mm |
| Capacity of FOSC |
Bunchy:24-288 (cores), Ribbon: up to 432(cores) |
2.2 Main components
| No. |
Name of components |
Quantity |
Usage |
Remarks |
| 1 |
FOSC cover |
1 piece |
Protecting fiber cable splices in whole |
Height x Diameter
400mm x 220mm |
| 2 |
Fiber optic splice tray (FOST) |
Max. 6 trays (either bunchy or ribbon |
Fixing heat shrinkable protective sleeve and holding fibers |
Suitable for:
Bunchy: 24,36, 48, 72 (cores)
Ribbon:12,18 (pieces) |
| 3 |
Base |
1set |
Fixing internal and external structure |
|
| 4 |
Fiber holding tray |
1 pcs |
Holding fiber with protective coat |
|
| 5 |
Plastic hoop |
1 set |
Fixing between FOSC cover and base |
|
| 6 |
Gasket ring |
1 set |
Big gasket ring is used to seal FOSC cover and base.
Small gasket ring is used to seal entry/exit tube |
1 piece of big gasket ring, 6 pieces of small gasket ring |
| 7 |
Pressure testing valve |
1 set |
After inject air, it is used for pressure testing and sealing testing |
Configuration as per requirement |
| 8 |
Earthing deriving device |
1 set |
Deriving metallic parts of fiber cables in FOSC for earthing connection |
Configuration as per requirement |
2.3 Main accessories and special tools
| No. |
Name of accessories |
Quantity |
Usage |
Remarks |
| 1 |
Heat shrinkable protective sleeve |
|
Protecting fiber splices |
Configuration as per capacity |
| 2 |
Nylon tie |
|
Fixing fiber with protective coat |
Configuration as per capacity |
| 3 |
Earthing wire |
1 piece |
Putting through between earthing devices |
|
| 4 |
Abrasive cloth |
1 piece |
Scratching fiber cables |
|
| 5 |
Labeling paper |
1 piece |
Labeling fibers |
|
| 6 |
Special wrench |
2 pieces |
Installing and tightening nut of reinforced core and nut (plastic) of entry/exit tube |
|
| 7 |
Measuring paper |
1 piece |
To measure perimeter of fiber cable, of which the diameter is enlarged with seal tape |
|
| 8 |
Seal tape |
1 ring |
Enlarging diameter of fiber cable which fits in with gasket ring. |
Configuration as per specification |
| 9 |
Insulation tape |
1 ring |
Enlarging diameter of fiber cable for easy fixing |
|
| 10 |
Metal hoop |
1 set |
For wall mounting and pole hugging |
|
| 11 |
Buffer tube
|
decided by customers |
Hitched to fibers and fixed with FOST, managing buffer. |
Configuration as per requirement |
| 12 |
Desiccant |
1 bag |
Put into FOSC before sealing for desiccating air |
|
3. Necessary tools for installation
3.1 Supplementary materials (to be provided by operator)
| Name of materials |
Usage |
| Scotch tape |
Labeling, temporarily fixing |
| Ethyl alcohol |
Cleaning |
| Gauze |
Cleaning |
3.2 Special tools (to be provided by operator)
| Name of tools |
Usage |
| Fiber cutter |
Cutting off fiber cable |
| Fiber stripper |
Strip off protective coat of fiber cable |
| Combo tools |
Assembling FOSC |
3.3 Universal tools(to be provided by operator)
| Name of tools |
Usage and specification |
| Band tape |
Measuring fiber cable |
| Pipe cutter |
Cutting fiber cable |
| Electrical cutter |
Take off protective coat of fiber cable |
| Combination pliers |
Cutting off reinforced core |
| Screwdriver |
Crossing/Paralleling screwdriver |
| Scissor |
|
| Waterproof cover |
Waterproof, dustproof |
| Metal wrench |
Tightening nut of reinforced core |
3.4 Splicing and testing instruments (to be provided by operator)
| Name of instruments |
Usage and specification |
| Fusion Splicing Machine |
Fiber splicing |
| OT DR |
Splicing testing |
| Provisional splicing tools |
Provisional testing |
Notice: The above-mentioned tools and testing instruments should be provided by the operators themselves.
4.Item and company images
5.Company Information
Takfly, established in 2000, has been manufacturing and exporting fiber cable, adapter, attenuator, connector, coupler, 18splitter, termination box, ODF, fiber instruments, media conceiver, switch, optical module, CWDM/DWDM, etc. Takfly's products have passed the management verification: ISO14001: 2004. and goods have passed RoHS, CE, FCC, REACH, EN50575, ISO9001, etc.
So far, Our products have been widely installed in many big worldwide project and work perfectly. Many project contactors ask the first and second operators to purchase fiber items from Takfly for their new project. In addition, we also have builted long term cooperation with Lapp, Amper, Telefonica, orange and Ericsson. All enquiry are warmly welcomed here no matter it's small or big, we promise to provide all customers high quality and good price item.
6.Why choose Takfly?
Service
1.Customer's logo: Acceptable;
2.General inspection on fixing before packing;
3.Third party inspection: Acceptable;
Quality Control
All products must go through five checks before manufacturing process;
1.Material incoming inspection before production;
2.Full check after every individual process finished;
3.Full check after production half-done;
4.Full check before packing;
5.Spots check after production packed before shipping;
Advantage
1.15 years experience in manufacturing fiber optic products;
2.Availability of R & D with more than 10 engineers;
3.Available of design and making mold with special molding house;
4.High quality, attractive price and fast delivery(2-7days);
5.OEM, ODM customer designs are also welcomed;
6.More than 200 workers;
7.Excellent service;
Delivery
1.Packing: Plastic bag& carton, Neutral packing or as your required;
2.Sample time: 1-3 days after confirm;
3.Order lead time: 2-7working days depend on quantity and products;
4.Shipping port: Shenzhen China or HK;
5.Shipping term: EXW or FOB;
Shipping
1.Once confirmed the order, and payment sent after finishing goods;
2.Goods will be sent within 7 days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc;
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility;
4.Please do not bid if you disagree with the shipping and handling charge;
Audited Supplier 
){kind=link}