| Customization: | Available |
|---|---|
| Type: | Optical Fiber Distribution Box |
| Wiring Devices: | ODF |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
TKS-M011 Fiber Optic Splice Closure provide one port in and four ports out. It is made of the high-quality ABS and with the mechanical sealing structure filled with the
sealing material. The scope of application is: aerial, underground, wall-mounting, duct-mounting, handhole-mounting. The ambient temperature ranges from -40ºC to
+65ºC.
Application:
1. Aerial -hanger
2. Wall-mounting
3. Directly buried
Specification:
| Outside dimension(Height × Diameter) | 480mm×220mm |
| Weight(excluding outside box) | 3500g-4100g |
| Number of inlet/out ports | 6 pieces |
| Diameter of fiber cable | 8mm~21mm |
| Capacity of FOSC | Bnuchy:24-288(cores),Ribbon:up to 432(cores) |
Main components:
| No. | Name of components | Quantity | Usage | Remarks |
| 1 | FOSC cover | 1 piece | Protecting fiber cable splices in whole | Height×Diameter 400mm×220mm |
| 2 | Fiber optic splice tray(FOST) | Max 6 trays(either bunchy orribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for:Bunchy:24,36,48,72(cores) Ribbon:12,18(pieces) |
| 3 | Base | 1set | Fixing internal and external structure | |
| 4 | Fiber holding tray | 1 pcs | Holding fiber with protective coat | |
| 5 | Plastic hoop | 1 set | Fixing between FOSC cover and base | |
| 6 | Gasket ring | 1 set | Big gasket ring is used to seal FOSC cover and base. Small gasket ring is used to seal entry/exit tube |
1 piece of big gasket ring,6 pieces of small gasket ring |
| 7 | Pressure testing value | 1 set | After inject air,it is used for pressure testing and sealing testing | Configuration as per requirement |
| 8 | Earthing deriving device | 1 set | Deriving metallic parts of fiber cables in FOSC for earthing connection | Configuration as per requirement |
| No. | Name of accessories | Quantity | Usage | Remarks |
| 1 | Heat shrinkable protective sleeve | Protecting fiber splices | Configuration as per capacity | |
| 2 | Nylon tie | Fixing fiber with protective coat | Configuration as per capacity | |
| 3 | Earthing wire | 1 piece | Putting through between earthing devices | |
| 4 | Abrasive cloth | 1 piece | Scratching fiber cables | |
| 5 | Labeling paper | 1 piece | Labeling fibers | |
| 6 | Special wrench | 2 pieces | Installing and tightening nut of reinforced core and nut | |
| 7 | Measuring paper | 1 piece | To measure perimeter of fiber cable,of which the diameter is enlarged with seal tape | |
| 8 | Seal tape | 1 ring | Enlarging diameter of fiber cable which fits in with gasket ring | Configuration as per specification |
| 9 | Insulation tape | 1 ring | Enlarging diameter of fiber cable for easy fixing | |
| 10 | Meter hoop | 1 set | For wall mounting and pole hugging | |
| 11 | Buffer tube | decided by customers | Hitched to fibers and fixed with FOSC,managing buffer | Configuration as per requirement |
| 12 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air |
Ordering information:
* Type: Adapter (Female to Female),Connector (Male to Female),In-line type,and variable type for your choice;
* Attenuation Range:1-30dB;
* Housing color: MM beige,SM UPC Blue,SM APC Green;
* LC,SC,FC,ST,etc attenuator for your requests;
* UPC and APC option.
Our Factory:
Our Products:
Our Exhibitions:
Why choose Takfly ?
Service
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantage
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
7.Excellent survice
Delivery
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOB
THANK YOU FOR YOUR BROWSING.
ANY QUESTIONS PLEASE CONSULT me IMMEDIATELY!
LOOKING FORWARD TO YOUR INQUIRY.
HAVE A NICE DAY~ :)
){kind=link}