| Customization: | Available |
|---|---|
| Application: | Communication, Art, Sensor, Medicine, Probe |
| Type: | Single-mode Fiber |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The fibers are placed in a loose tube made of high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After PSP is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure. This kind of cable is specifically applied for self-supporting aerial installation.
Characteristics:
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cost
Special tube filling compound ensure a critical protection of fiber
The following measures are taken to ensure the cable watertight:
1. Steel wire used as the central strength member
2.100% cable core filling
3.PSP enhancing moisture-proof
4.Water-blocking material
Application:
Adopted to outdoor distribution;
Suitable for aerial
Long distance and local area network communication.
Optical Fiber Characteristics:
| G.652.D | G.655 | 50/125μm | 62.5/125μm | ||
Attenuation |
@850nm | ≤3.0 dB/km | ≤3.0 dB/km | ||
| @1300nm | ≤1.0 dB/km | ≤1.0 dB/km | |||
| @1310nm | ≤0.36 dB/km | ≤0.40 dB/km | |||
| @1550nm | ≤0.22 dB/km | ≤0.23dB/km | |||
Bandwidth |
@850nm | ≥500 MHz·km | ≥200 MHz·km | ||
| @1300nm | ≥1000 MHz·km | ≥600 MHz·km | |||
| Numerical Aperture | 0.200±0.015NA | 0.275±0.015NA | |||
| Cable Cut-off Wavelengthλcc | ≤1260nm | ≤1480nm | |||
){kind=link}