Customization: | Available |
---|---|
Application: | Communication |
Type: | Multi-mode Fiber |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
G.652.D | G.655 | 50/125μm | 62.5/125μm | ||
Attenuation | @850nm | ≤3.0 dB/km | ≤3.0 dB/km | ||
@1300nm | ≤1.0 dB/km | ≤1.0 dB/km | |||
@1310nm | ≤0.36 dB/km | ≤0.40 dB/km | |||
@1550nm | ≤0.22 dB/km | ≤0.23dB/km | |||
Bandwidth | @850nm | ≥500 MHz·km | ≥200 MHz·km | ||
@1300nm | ≥1000 MHz·km | ≥600 MHz·km | |||
Numerical Aperture | 0.200±0.015NA | 0.275±0.015NA | |||
Cable Cut-off Wavelengthλcc | ≤1260nm | ≤1480nm |
Item | Contents | Value |
Loose tube | material | PBT/PP |
diameter | Ф2.2mm | |
Central strength member | material | Steel wire/Steel wire with PE cover |
diameter | Ф2.0mm | |
Inner sheath | material | MDPE/HDPE |
Thickness | 1.0mm | |
Outer sheath | material | MDPE/HDPE |
Thickness | 1.7mm |
Cable type | Diameter (mm) |
Weight (Kg/km) |
Max.Tension (N) |
Crush Resistance (N/100mm) |
Min. Bending Radius (mm) |
Storage temperature (ºC) |
|
Long/Short Term | Long/Short Term | Dynamic | Static | ||||
GYTA53-2~60 | 12.5 | 160 | 1000/3000 | 1000/3000 | 20D | 10D | -20~+70 |
GYTA53-62~72 | 14.5 | 210 | |||||
GYTA53-74~96 | 15.7 | 245 | |||||
GYTA53-122~144 | 18.5 | 320 |