Performance:
1. 12 1000Base-X optical ports and 12 1000Base-T electrical ports;
2. standard: Comply with IEEE802.3z / A;
3. Ethernet electrical port supports full-duplex and half-duplex network communications, with auto-4. negotiation capabilities;
4. Ethernet port supports AUTO-MDIX (cross line and straight line adaptation);
5. High backplane bandwidth of 128GB, Layer 2 switching packet forwarding rate to achieve full speed;
can detect when the optical signal is lost when the opposite device is powered off or fiber fails, and through the indicator light indicates the alarm;
6. The optical switch electrical port is a 10/100/1000 M adaptive port, which sets its own rate according to the highest rate of the electrical port of the connected peer.
7. No relay transmission distance up to 2 ∽ 120 km;
8. optical interface optional: single / double fiber, single mode / multimode;
9. Interface: SC / FC / ST / LC LC (SFP) (default);
10. Power: Built-in power AC220V;
Technical Parameters:
Entherent Ports:
> Electrical port: Number of interfaces: 12; Interface type: RJ45, 10/100 / 1000M,
> Rate: 10/100 / 1000M adaptive, full / half duplex fully adaptive
> Protocol: Supports IEEE 802.3, IEEE 802.1Q (VLAN)
> MAC Address Table: You can learn 4096 MAC addresses
> Physical interface: RJ45 seat, support Auto-MDIX (cross / straight line adaptive)
Optical Ports:
> Optical port: Number of interfaces: 12; Interface type: SFP, 1000M
> Wavelength: single mode 1310nm / 1550nm
Multimode 850nm / 1310nm (optional)
> Fiber cores: Single / dul fiber (optional)
> Transmit power: -9dBm∽-5dBm
> Transmission length: single mode 20/40/60/80/100 / 120km
Multimode 2km (optional)
> Receiving sensitivity: better than-36dBm
> Connector: SC / FC / LC, default: SFP
Audited Supplier 
){kind=link}