| Customization: | Available |
|---|---|
| Transmission Medium: | Multimode |
| Structure: | SC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Parameter:PLC Splitter, Adaptor type: ST, SC, LC, FC etc. 1*2/1*4/1*8/1*16*1*32*1*64Cores,Steel tube,ABS box,bare fiber are available
Application:Optical communication systems /CATV /FTTH /Testinig instruments.
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. Takfly provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR-1221-CORE requirements.
| Key Features | |||||||
| 1. Low IL and PDL | |||||||
| 2. High reliability | |||||||
| 3. High channel counts | |||||||
| 4. Wide wavelength range | |||||||
| 5. Large operating temperature range | |||||||
| 6. Excellent Environmental & Mechanical Stability | |||||||
| Applications | |||||||
| 1. FTTX (FTTP, FTTH, FTTN, FTTC) | |||||||
| 2. Local Area Networks (LAN) | |||||||
| 3. Test Equipment | |||||||
| 4. CATV | |||||||
| 5. Analog/Digital Passive Optical Networks (PON) | |||||||
| Compliance | |||||||
| --Telcordia GR-1209 | |||||||
| --Telcordia GR-1221 | |||||||
| 1×N PLC Splitter Specifications (Measured at room temperature and excludes connector loss) | |||||||
| Port Configuration | 1x2 | 1x4 | 1x8 | 1x16 | 1x32 | 1x64 | |
| Fiber Type | SMF-28e or customer specified | ||||||
| Operating Wavelength (nm) | 1260~1650 | ||||||
| Insertion Loss (dB) | Typical | 3.6 | 6.8 | 10.2 | 13.3 | 16.2 | 20.5 |
| Max | 4.0 | 7.4 | 10.5 | 13.5 | 16.9 | 21.0 | |
| Loss Uniformity (dB) | Max | 0.5 | 0.7 | 1.0 | 1.4 | 1.8 | 2.0 |
| Return Loss (dB) | Min | 55 | 55 | 55 | 55 | 55 | 55 |
| Polarization Dependent Loss(dB) | Max | 0.2 | 0.2 | 0.3 | 0.3 | 0.3 | 0.4 |
| Directivity (dB) | Min | 55 | 55 | 55 | 55 | 55 | 55 |
| Wavelength Dependent Loss(dB) | Max | 0.3 | 0.3 | 0.3 | 0.8 | 0.5 | 0.8 |
| Temperature Dependent Loss (-40~85 ºC) (dB) | Max | 0.5 | 0.5 | 0.5 | 0.8 | 0.8 | 1 |
| Operating Temperature (ºC) | -40~+85 | ||||||
| Storage Temperature (ºC) | -40~+85 | ||||||
| Packaging Size (mm) | Fan-Out | 60x7x4 | 60x7x4 | 60x7x4 | 60x12x4 | 80x20x6 | 80x20x6 |
| 2×N PLC splitter Specifications (Measured at room temperature and excludes connector loss) | |||||||
| Port Configuration | 2x2 | 2x4 | 2x8 | 2x16 | 2x32 | 2x64 | |
| Fiber Type | SMF-28e or customer specified | ||||||
| Operating Wavelength (nm) | 1260~1650 | ||||||
| Insertion Loss (dB) | Typical | 3.8 | 7.4 | 10.8 | 14.2 | 17 | 21 |
| Max | 4.2 | 7.8 | 11.2 | 14.6 | 17.9 | 21.5 | |
| Loss Uniformity (dB) | Max | 1.0 | 1.4 | 1.5 | 2 | 2.5 | 2.5 |
| Return Loss (dB) | Min | 50 | 50 | 50 | 50 | 50 | 50 |
| Polarization Dependent Loss(dB) | Max | 0.2 | 0.2 | 0.4 | 0.4 | 0.4 | 0.5 |
| Directivity (dB) | Min | 55 | 55 | 55 | 55 | 55 | 55 |
| Wavelength Dependent Loss(dB) | Max | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 |
| Temperature Dependent Loss (-40~85 ºC) (dB) | Max | 0.5 | 0.5 | 0.8 | 0.8 | 1 | |
| Operating Temperature (ºC) | -40~+85 | ||||||
| Storage Temperature (ºC) | -40~+85 | ||||||
| Packaging Size (mm) | Fan-Out | 60x7x4 | 80x12x4 | 80x12x4 | 80x20x6 | ||
| Remark:The above IL is for the PLC Splitter without connectors,for the PLC Splitter with connectors, the above IL should add 0.3dB each | |||||||
| Environmental Conditions | |||||||
| Operating Temperature | ºC | -40~+85' | |||||
| Storage Temperature | ºC | -40~+85 | |||||
| Operating Humidity | %RH | ≤93 | |||||
| Storage Humidity | %RH | ≤93 | |||||
| Order Information | |||||||||||||||||||||||||||||||||||||||||||||||
| PLC | |||||||||||||||||||||||||||||||||||||||||||||||
| Wavelength | Port | Fiber Type | Input Pigtail | Fiber Length | In/Out Connector | ||||||||||||||||||||||||||||||||||||||||||
| 35=1310/1550nm 13=1310nm 15=1550nm | 0102=1x2 0104=1x4 0108=1x8 0116=1x16 0132=1x32 0164=1x64 0216=2x16 0232=2x32 0264=2x64 | 1=G652D 2=G657A C=Customize | 1=bare fiber 2=900µm jacket fiber | 1=1m 2=1.2m 3=1.5m C=Customize | 0=Adapter 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=ST 6=LC C=Customize | ||||||||||||||||||||||||||||||||||||||||||
Why choose Takfly ?
Service:
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control:
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantage:
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 worker
7.Excellent service
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirmation.
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen, HK or other ports as you required.
5.Shipping term: EXW or FOB
Shipping:
1.Once confirmed the order, and payment sent after finishing goods.
2.Goods will be sent within 7 days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address.
){kind=link}