24 Port POE Switch with supports PoE IEEE 802.3at international standard
Description:
DF-1.25G-24P-2E-2F is a 28-Port Gigabit PoE Switch with 24 PoE Ports, 2 RJ45 Uplink ports, 2 SFP Gigabit Uplink Optical Ports, port 1 to port 24 supports PoE IEEE 802.3at international standard, each port power is 30W. Total power is 350W.
This POE network switch can meet customer's general demands. POE network switch with POE function, designed for high-definition network camera's internet access. It provides 24 1000Mbps PoE Ethernet switches, complies with IEEE802.3af/at standards, and also simplifies wiring, avoids the troublesome of installing power socket for powered devices.
Typical applications please refer to following picture.
Features:
28-Port Gigabit PoE Switch with 24 PoE Ports, 2 RJ45 uplink, 2 SFP Gigabit Uplink Optical PortsSupply power to wireless access points AP and network IP surveillance cameras Port 1 to Port 24 supports IEEE802.3at power (each port maximum power is 30W)24x 10/100/1000 Mbps ports + 2RJ45 + 2x SFP gigabit optical uplink ports Compatible with IEEE 802.3 10i and IEEE 802.3u standardThe packet forwarding speed is 1.488Mbps of one wire-speed portPort features with auto-flip(Auto MDI/MDIX)Network port comes with lighting-proof All ports support wire-speed switching, frame size within the range of 64 to 1536 can achieve wire-speed Standard 1U rack design, suitable for rack installation mode Automatic adjustment, plug and play, no need software and protocol conversion
Product Picture:
Technical Specifications:
| Item |
Description |
| Model |
DF-1.25G-24P-2E-2F |
| Power Supply |
Power Supply Mode |
Mains on load |
| Voltage Range |
AC 100~240V |
| Power Consumption |
The device <20W, POE power supply <350W |
| Network Port Parameter |
Network Ports |
1~24 Ports: 10/100/1000Mbps Ethernet port, adaptive control
UPLINK Ethernet port: 10/100/1000Mbps Ethernet port
Uplink SFP:1000Mbp |
| Transmission Distance |
1~24 Ethernet Port:0~100m
Mandatory 10 Mbps reach up to 250m
2 Ethernet Uplink Port:0~100m
2 SFP: According to different SFP |
| Transmission Media |
1~24 Ethernet Port:Cat5e/6 standard UTP cable,
2 Ethernet Uplink Port:Cat5e/6 standard UTP cable
2 SFP: LC interface optical fiber |
| POE Agreement |
IEEE802.3 af/at standards |
| PoE Power Supply Mode |
End-span method |
| PoE Power Supply Wattage |
Each port≤30W,Whole device<350W |
| Network Switch Specification |
Network Standard |
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T |
| Swap Mode |
Store-and- forward |
| Switch Capacity |
56Gbps |
| MAC Address List |
16K |
| Status Indicators |
Power Indicator Light |
One power light (green) |
| Optical Fiber Port Indicator |
One fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver data |
| FE Uplink Port |
LED (Green): On, port is link on; Off, port is link down; |
| PoE Indicator |
1~24 PoE indicator light(yellow) |
| PoE Network Port LED |
1~24 port ( green light on RJ45 jack) Keeps on when normally connected, Blinking when transceiver data |
| Switch |
Switch 1(Vlan 1 to 8) |
ON: Vlan open, 1 to 8 POE ports only can communicate with uplink port; OFF: Vlan close, normal status |
| Switch 2(Vlan 9 to 16) |
ON: Vlan open, 9 to 16 POE ports only can communicate with uplink port; OFF: Vlan close, normal status |
| Switch 3(Vlan17 to 24) |
ON: Vlan open, 17 to 24 POE ports only can communicate with uplink port; OFF: Vlan close, normal status |
| Switch 4 |
Together with switch1 to switch3 to decide the ports to CCTV mode. If switch4 is on, when switch1 or switch2 or switch3 open, will open 250 meter CCTV mode; if switch4 is off, when switch1 or switch2 open, will open vlan only. |
| Protection Level |
Surge Immunity |
Level 3, executive standard:IEC61000-4-5 |
| Electrostatic Protection |
1a touch electric discharge: level 3 1a Air discharge: level 3 Executive standard:IEC61000-4-2 |
| Operating Environment |
Working Temperature |
-10ºC~55ºC |
| Storage Temperature |
-40ºC-85ºC |
| Humidity(non-congeal) |
0~95% |
| Mechanical Attributes |
Dimensions (L*W*H) |
442mm×224mm×44.5mm |
| Color |
Black |
| Weight |
4.5kg |
| Reliability |
Mean time between failures (MTBF) |
>50000h |
Note:
If any changes with product specification, forgive without prior notice.
1. As transmission distance has certain relation with the cable, so you are suggested to use standard cat5e/6 cable for longest distance needed.
POE Switch/Media Converter Production Line:
Takfly Certificates:
International Exhibitions:
Why choose Takfly ?
Our Services:
1.Order inquiry: Keep working time all the day to gurantee the first reply to clients,and 24 hours no Cellphone power off
2.Order production: Keep very close touch with production department to gurantee the right delivery time to clients
3.Before shipment: Our sales would double check the order quantity,package and strength of cartons to avoid lost and damage
4.After shipment: Keep tracking shipping status and reporting to clients
5.Shipment: DHL,UPS,FEDEX,TNT,EMS,SEA,AIR etc.
Quality Control:
All products must go through five checks before manufacturing process:
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantages:
1.More than 15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days).
5.OEM, ODM etc. are welcome.
6. Excellent service.
Based on the concepts of "High Quality, Reasonable Price, Excellent Service and Mutual Benefit", TAKFLY is becoming a famous brand all over the world.
Warmly welcome to be our business partner, and let us help you to win the markets !
If you interest or have any question, Why not send inquiry? Welcome & Please Just Do It Now !!!
Audited Supplier 
){kind=link}