4 Ports 10m/100Mbps Poe Ethernet Switches Complies with IEEE802.3af/at Standards Fiber Optic Switch

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Ethernet Switch
• Model NO.: DF- 155M-4P-E
• Transmission Rate: 1000Mbps
• Ports: 4
• Power Supply Mode: Power Adapter
• Voltage Range: DC48~56V
• Power Consumption: The Device < 5W,Poe Power Supply <60W
• Network Ports: 1~4 Ethernet Port: 10/100Mbps
• Poe Power Supply Mode: End-Span Method
• Poe Power Supply Wattage: Each Port Less Than 30W,Whole Device Less Than 60W
• Data-Caching Mechanism: 448K
• Mac Address List: 1K
• Surge Immunity: Level 3, Executive Standard:IEC61000-4-5
• Working Temperature: 0c~55c
• Transport Package: Carton
• Specification: 128mmx77.75mmx27.35mm
• Trademark: Takfly/OEM/Neutral
• Origin: Shenzhen, China
• HS Code: 8517629900
• Production Capacity: 3500PCS/Week

Product Description

4 Ports 10M/100Mbps POE Ethernet switches complies with IEEE802.3af/at standards Fiber Optic Switch1. Overviews

DF- 155M-4P-E is specialized unmanaged POE switch designed for video surveillance and network project system, etc. It provides 4 x 100Mbps Ethernet ports and 1x 100Mbps uplink ports, support VLAN function, can effectively prevent whole system from broadcast storm so that make the data transfer safer.
This POE network switch can meet customer's general demands. POE network switch with POE function, designed for high-definition network camera's internet access. It provides 4 100Mbps PoE Ethernet switches, complies with IEEE802.3af/at standards, and also simplifies wiring, avoids the troublesome of installing power socket for powered devices.
Typical applications please refer to following picture

1. Features

Provide 4 x 100Mbps Ethernet ports, 1 x 100Mbps up-link ports 
Support End-Span method complies with IEEE802.3 af/at standards, can supply max 30W power which is possible to power high-power infrared cameras.
Comply with IEEE802.3, IEEE802.3u, IEEE802.3af/at standards. Support IEEE802.3x full-duplex flow control, support Auto MDI/MDIX
Support port-base Vlan, prevent from broadcast storm so that make data conversion more efficient and safe.
Various LED display functions can real-timely display the device's current working conditions, and help prompt facility and remove trouble easily.
Excellent lightning protection, lightning capacity up to 2KV
Easy to install and operate on walls or on the desktops

 

2. Products Panel Figure

Front panel

 Back panel

3. Technical Specifications

Item		Description
Model		DF- 155M-4P-E
Power Supply	Power Supply Mode	Power Adaptor
	Voltage Range	DC48~56V
	Power Consumption	The device <5W                        POE power supply <60W
Network Port Parameter	Network Ports	1~4 Ethernet Port:10/100Mbps 1 Uplink Port:10/100Mbps
	Transmission Distance	1~4 Ethernet Port:100m Mandatory 10 Mbps reach up to 250m Uplink port:100m
	Transmission Media	1~4 Ethernet Port:Cat5e/6 standard UTP cable,     Uplink Port:Cat5e/6 standard UTP cable
	POE Agreement	IEEE802.3 af/at standards
	PoE Power Supply Mode	End-span method
	PoE Power Supply Wattage	Each port ≤30W,Whole device<60W
Network Switch Specification	Network Standard	IEEE802.3 10BASE-T,IEEE802.3u 100BASE-TX/FX,IEEE802.3az(Uplink optical fiber port )
	Swap Mode	Store-and- forward
	Data-Caching Mechanism	448K
	MAC Address List	1K
Status Indicators	Power Indicator Light	One power light (Green)
	Optical Fiber Port Indicator	One fiber link indication light ( green), Green light keeps on when the fiber port is well connected; Blinking when transceiver data
	PoE Indicator	4 PoE indicator light(yellow)
	PoE Network Port LED	1~4 port ( green light on RJ45 jack) Blinking when transceiver data
Switch	Vlan Switch	One, slide switch to "ON" + press restart button, Vlan function opens
Protection Level	Surge Immunity	Level 3, executive standard:IEC61000-4-5
	Electrostatic Protection	1a touch electric discharge: level 3     1a Air discharge: level 3    Executive standard:IEC61000-4-2
Operating Environment	Working Temperature	0ºC~55ºC
	Storage Temperature	-40ºC~70ºC
	Humidity(non-congeal)	0~95%
Mechanical Attributes	Dimensions (L*W*H)	128mmx77.75mmx27.35mm
	Color	Black
	Weight	425g
Reliability	Mean time between failures (MTBF)	>50000h

Note:
If any changes with product specification, forgive without prior notice.
As transmission distance has certain relation with the cable, so you are suggested to use standard cat5e/6 cable for longest distance needed.

4. V-lan

5.1 Introduction
    When V-lan function is opened, the LAN port can't make data conversion but can only communicate via uplink port. The V-LAN workstation is built separately between every network port and UP-LINK port.
In the same V-lan workstation, no matter which actual PoE switch being connected, the signal transmission are separately isolated from each other which seems they are on the different switches. The broadcast in the same V-lan can only be received by the members but can't be transmitted into other V-lan, which can greatly control unnecessary broadcast storm. What's more, different V-lan can't even communicate with each other when there is no routing, which increases the safe degree among different department in the enterprise.

5.2 Configuration
   Toggle the V-lan button on the back of the switch to ON state, V-lan indicator lights, then press the reset button to restart the switch, in this way V-lan functions.

Note: Please press reset button or repower the device when turn on V-lan, only in this way the switch can enter corresponding mode. 
 
5. Installation

Packing List
Before installation, please check the following equipment and accessories, if there are any missing, please contact with your supplier.
1) 1 set of DF- 155M-4P-E
2) 1 power adapter
3) 1 user manual
4) 1 warranty card
Please install as below steps
Before installation, please turn off the power of all signal sources and the monitor in case of the damage to transmission device
Using network cables to connect with Ethernet ports of IP cameras and POE ports of PSE-2 series unmanaged POE switch
It using UP-LINK port to connect NVR or computer devices.
Check weather installation is correct and the device undamaged. Before power on PSE-2 series unmanaged POE switch, make sure that all connections are reliable
Confirm all network devices are powered and can work normally.

6. Troubleshooting

When the device encountered with troubles, it can be solved by the methods below:
1) Make sure the device is installed correctly referring to the requirements;
2) Make sure RJ45 cable is good contacted without open circuit; the cable design complies with EIA/TIA568A or 568B international standards.
3) Each PoE port can provides max 30W to switch and the total power is less than the maximum power provided by the device. So please don't connect with the PoE device which is more than 30W.
4) Press reset button to check if the device can work properly.
5) Replace the trouble device with a normal working device to check if the device is damaged.
6) If all the above methods still don't work, please contact with manufacturer directly.
 

 7. Making methods of RJ45 connector
Required tools: wire crimpers, network cable tester.
The wire sequence of RJ45l connector must complies with international standard of EIA/TIA 568A or EIA/TIA 568B.
Strip about 2cm's of insulating jacket to let 4 pairs UTP can be seen.
Separate 4 pairs UTP cable, and try to straighten each pair.
Arrange 8 cables with correct line sequence of EIA/TIA 568A or EIA/TIA 568B.
Cut thread residue and leave 1.5cm wire which exposed outside the insulating layer, and ensure 8 wires are straight and neat.
Put 8 wires in RJ 45 connector, then press with wire crimpers.
Repeat above five steps , make the other side of UTP cable; Then using the cable tester to test whether the cat5e/6 works normally.

Why choose Takfly ?

Service:
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
 
Quality Control:
All products must go through five checks before manufacturing process
 
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
 
Advantage:
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 worker
7.Excellent service
 
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirmation.
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen, HK or other ports as you required.
5.Shipping term: EXW or FOB