10/100/1000M 2 dual fiber to 4 RJ45 ports Giga Fiber ethernet switch
Brief Introduction
2 fiber ports 4 RJ45 Ports 10/100/1000M fiber Ethernet switches is designed for fiber optic multipoint gathering application, it has 2 1.25Gbps fiber ports and 4 10/100/1000Mbps Self-adaption RJ45 Ports. The user can choose different optical module according to their need, to achieve 10Base -T,100Base-T and 1000Base-T Ethernet optic and electrical signal connect without gap. It not only greatly extends the Ethernet transmission distance, but also with isolation protection, data security performance, and work Superior stability, easy to maintain and so on, perfectly protect the communication devices from damage under the circumstance of lightning stroke, Surge and electromagnetic interference and so on.
Features
support 10/100/1000Base-T and 1000Base-SX/LX conversion between;2 full duplex 1.25Gbps fiber ports, 4 10/100/1000M Self-adaption RJ45 prots;10/100/1000M rate adaptive, MDI / MDI-X adaptive, full / half duplex adaptive;all optical/electrical ports have connection/activity status indicator to facilitate the installation, commissioning and maintenance of the equipment;Fiber port is SFP slot, can flexibly choose the appropriate optical modules according to the actually need;Support IEEE802.1d spanning tree (Spanning Tree) protocol, to make the network is more simple;support IEEE802.1q and VLAN division;support QoS, to ensure the efficient operation of the network;support 5 ~ 16V wide voltage input;support up to 10K bytes long data packet transmission;simple to use, plug and play, without any settings;the size and weight is less than similar item in the market;double rib cooling design, with cooler inside, to ensure it can work steady for a long time;
Technical Spec
Protocol Standards |
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX/FX
IEEE802.3ab 1000Base-T |
IEEE802.3x Flow control
IEEE802.1q VLAN IEEE802.1pQoS |
| IEEE802.3z 1000Base-SX/LX |
IEEE802.1d Spanning Tree |
RJ45 Ports Parameters |
Ethernet Port connector:RJ45
Transmission Rate: 10/100/1000Mbps Self-adaption
Cable Type: UTP-5E or higher
Transmission Distance: 100 meters |
|
Fiber Port Parameters |
Fiber Port: SFP slot Transmission Rate:1.25Gbps
Fiber Wavelength:850nm/1310nm/1490nm/1550nm
Fiber Type: Single mode 9/125μm, multimode 50/125μm,62.5/125μm
Transmission Distance: 550m ~ 100km |
Performance |
Forwarding: Store and forward
Transmission mode: full duplex / half duplex adaptive
MAC address table: 10K
Frame memory: 1Mbit
Backplane handwidth:12G
Network delay: ≤20μs |
| Power |
Power supply type: external power supply |
Certifications
Workshop
Contact
Audited Supplier 
){kind=link}
){kind=link}