60mm fiber optic heat shrinkable Tube
Description
Shrinkable sleeve is applied to the optical fiber closure to fix and protect the optical fiber when
splicing.The sleeve can be divided into two types(single and mass) according to the
function. The single type is used for the single-fiber, and the mass type is used for
the ribbon fiber. It is different in the reinforcement between two types. The single
one realizes the reinforcement by the stainless steel needles, the later one via the
ceramic reinforcement member to realize the function.
Mass means there are several cores for the fiber. So the mass sleeve includes 4cores,
6cores,8cores,12cores(for types).
Features
Moisture resistant for environmental protection
Clear sleeve make it easy to detect splice before shrinkage
Easily use and avoid any damages to the optical fiber during installation
Color optical fiber splice protector is very convenience for installation
Applications
Consist of a rod of reinforcing the splice, hot fusion tubing and cross-linked polyolefin.
To rebuild the coating of fiber to provide mechanical strength at the fusion joint area and keep optical
transmission properties.
Material:
The material for heat shrinkable tube is crosslinked polyolefin,
shrinkable tube,
Strengthen the stainless steel wire
Specifications:
| Shrinking Temperature (°C) |
110 ~ 130 |
| Radial Shrinking Rate (%) |
>50 |
| Axial Shrinking Rate (%) |
<10 |
| Low Temperature Property |
No crackle at -55°C lasting 4 hours |
| Normal Operation Temperature (°C) |
-55°C ~ + 135°C |
| Normal Operature Relative Humidity |
≤95% |
| Spark- over Strength (kV/mm) |
≥20 |
| Tensile Strength (Mpa) |
20 |
| Loss at -40°C |
0.03dB |
| Loss at +60°C RH95% |
0.02dB |
Technical indicators:
| Performance |
Test Method |
Typical data |
| Tensile strength |
ASTM D 2671 |
18MPa |
| Elongation at break |
ASTM D 2671 |
700% |
| Density |
ISOR 1183D |
0.94g/cm³ |
| Dielectric strength |
IEC243 |
25KV/mm |
| Volume resistance |
IEC243 |
10 15 Ω.cm |
| Length changes |
ASTM D 2671 |
±5% |
Heat Shrinkable Sleeves/Splice Protector Dimensions:
| Part NO. |
OD after Recovery
(mm) |
Length
(mm) |
Fusion tube (D) |
Steel rod(d) |
Package(pcs/bag) |
| ID(mm) |
Length (mm) |
OD(mm) |
Length (mm) |
| DFSP-60 |
3.0±0.1 |
60 |
1.5 |
60 |
1.5 |
55 |
100 |
| DFSP-60 |
2.8±0.1 |
60 |
1.3 |
60 |
1.5 |
55 |
100 |
| DFSP-45 |
3.0±0.1 |
45 |
1.5 |
45 |
1.5 |
40 |
100 |
| DFSP-40 |
3.0±0.1 |
40 |
1.5 |
40 |
1.5 |
35 |
100 |
| DFSP-23 |
3.0±0.1 |
23 |
1.5 |
23 |
1.5 |
18 |
100 |
| DFSP-60 |
2.6±0.1 |
60 |
1.3 |
60 |
1.2 |
55 |
100 |
| DFSP-45 |
2.6±0.1 |
45 |
1.3 |
45 |
1.2 |
40 |
100 |
| DFSP-40 |
2.6±0.1 |
40 |
1.3 |
40 |
1.2 |
35 |
100 |
| DFSP-30 |
2.6±0.1 |
30 |
1.3 |
30 |
1.2 |
25 |
100 |
| DFSP-25 |
2.6±0.1 |
25 |
1.3 |
23 |
1.2 |
20 |
100 |
WOULD YOU LIKE SOME TRIAL ORDERS TO TEST THE MARKET?
FREE AND HIGH QUALITY SAMPLES COULD BE PROVIDED~
*Before Sale Service:
We provide professional offer. Provide detailed products test report and related specifications.
We provide professional technology support to meet the requirements of customers.
Within 12 hours of the corresponding customer inquiry, our commissioners will promptly get in touch with the customers.
*After Sale Service:
Takfly Communications Co., Ltd. Is a Hi-Tech enterprise having its own brand and specializing in R&D, manufacture and sales of fiber optical communications equipments. If a material or workmanship defect arises and a valid claim is received within the warranty period, we will replace the items only and bear the shipping cost for both sides. We could not be held liable for damages to personal property due to misuse or improper care and maintenance of items. There is no fault rate for the items we delivered, if there is fiber optic equipment that does not work when you get it, just contact us. If we should be responsible for it after we test, we will replace it for you. We are equipped with the good after service department and never escape our responsibility.
Why choose Takfly ?
Service
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantage
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
7.Excellent survice
Delivery
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOBPackaging1.All products will be packed in double corrugated carton , so the product can get effective protection to avoid damage.
2. Packaging according to customer requirement Shipping1. We shipping via DHL / FedEx / TNT/etc for samll orders. Yow can get your packages in about 3-5 days all over the world.
2. For big order, we will arrange Air cargo for your shipment, so it will be much cheaper than DHL, UPS etc.
3. You can choose your own shipping agent, we will provide good cooperation for it.
THANK YOU FOR YOUR BROWSING.
ANY QUESTIONS PLEASE CONSULT me IMMEDIATELY!
LOOKING FORWARD TO YOUR INQUIRY.
HAVE A NICE DAY~ :)
Audited Supplier 
){kind=link}
){kind=link}